Add to favourites
News Local and Global in your language
16th of October 2018

Technology



New Mars rover gets high-tech paint job for harsh conditions on Mars

John Campanella does all kinds of custom paint jobs in his spare time, airbrushing designs on cars, semis, motorcycles, and guitars. But by day, he works in the paint shop of NASA's Jet Propulsion Laboratory, applying paint to components for Pathfinder, Juno, Cassini, and Deep Impact, among other NASA missions.

"I think my paint is just about everywhere in the solar system," Campanella says. His team just finished painting the chassis for the Mars 2020 rover, which will be a nuclear-powered six-wheel drive machine about the size of an SUV. JPL features this under-appreciated process in a new video.

Schematic for the Mars 2020 rover NASA/JPL-Caltech Prepping the rover's chassis with painter's tape NASA/JPL-Caltech Applying the tape is an exacting task NASA/JPL-Caltech Almost done with the taping NASA/JPL-Caltech Now it's time to prep the surface by sanding everything down. NASA/JPL-Caltech Applying the paint NASA/JPL-Caltech Chassis looking sharp after paint job NASA/JPL-Caltech Getting the chassis ready for transport NASA/JPL-Caltech Transporting the painted chassis NASA/JPL-Caltech Mechanical technician Eduardo (Eddie) Castro uses a paint meter to measure the paint thickness. NASA/JPL-Caltech Quality Assurance making sure the paint application is between 4 and 6 mils. NASA/JPL-Caltech Now the chassis is ready to meet the rest of the Mars 2020 rover's components NASA/JPL-Caltech Model for the completed Mars 2020 rover NASA/JPL-Caltech

It took engineers and technicians 5,000 hours to assemble the chassis. Once it was in Campanella's shop, his team first had to carefully apply more than 600 pieces of masking tape, since there are so many parts of the chassis where the paint can't be applied. It's the same tape anyone can buy in their local hardware store, except instead of tearing off pieces by hand, the JPL paint team uses a computer controlled cutter so that each piece is tailored to be just the right size and shape. They also applied over 130 temporary sheet metal stencils to protect larger sections of the chassis, and then carefully sanded down the surface.

The tape might be mundane, but the primer and flat white paint used on the chassis is not. It has to be able to stick to aluminum (the material used for the chassis) and hardy enough to withstand UV rays, jolts, and vibrations—not to mention the extreme cold on Mars. And it can't emit any organic compounds since those could interfere with all the delicate scientific equipment on board, not to mention contaminate any Martian samples the rover collects. That's why the finished chassis was baked in a vacuum chamber for three days to harden the paint and bake out any contaminants.

The finished product is now in the Spacecraft Assembly Facility, parked next to the cruise and descent stages of the rover. "It may not have flames or racing stripes, but it still looks beautiful," says Campanella. The Mars 2020 mission should launch in July 2020 from Cape Canaveral, reaching Mars in February 2021.

[embedded content]Courtesy of Jet Propulsion Laboratory.

Listing image by NASA/JPL-Caltech

Read More




Leave A Comment

More News

TechNewsWorld

PCWorld

TechCrunch

FOX News

Thetechhacker

SlashGear

Electrek

Ars Technica UK

Top Technology News --

Disclaimer and Notice:WorldProNews.com is not the owner of these news or any information published on this site.